Thrust Bearings

Contact Now

Thrust ball bearings, composed of bearing balls supported in a ring, can be used in low thrust applications where there is little axial load.
Cylindrical thrust roller bearings consist of small cylindrical rollers arranged flat with their axes pointing to the axis of the bearing. They give very good carrying capacity and are cheap, but tend to wear due to the differences in radial speed and friction which is higher than with ball bearings.
Tapered roller thrust bearings consist of small tapered rollers arranged so that their axes all converge at a point on the axis of the bearing. The length of the roller and the diameter of the wide and the narrow ends and the angle of rollers need to be carefully calculated to provide the correct taper so that each end of the roller rolls smoothly on the bearing face without skidding. These are the type most commonly used in automotive applications (to support the wheels of a motor car for example), where they are used in pairs to accommodate axial thrust in either direction, as well as radial loads. They can support greater thrust loads than the ball type due to the larger contact area, but are more expensive to manufacture.

SKF BFSB 353320/HA4 Thrust Bearings

50 130
50x130x31 1,9 Kg

SKF BFSB 353312/HA1 Custom Bearing Assemblies

5.5 in 167258 lbf
19.8 in Four-Bolt Plummer Bl

SKF BFSB 353210 Screw-down Bearings

KOYO 13 mm
35 mm 55

SKF BFSB 353901/HA4 Needle Roller and Cage Thrust Assemblies

330 1120 kN
600 1120 kN

SKF 351573 Tapered Roller Thrust Bearings

48000 N / Fatigue li 210 mm
5,2 mm / Axial displ 52

SKF BFSB 353247 Cylindrical Roller Thrust Bearings

R155.63 713630300
5563 DACIA / LOGAN / eng

SKF BFSB 353201 Thrust Bearings

1.6875 in 3.9370 in
0.8640 in Imperial

SKF BFSB 353285/HA4 Custom Bearing Assemblies

6 100 r/min 46,5 kN
30.213x62x19.05 20,638 mm

SKF BFS 8000/HA1 Screw-down Bearings

25 19,4 kN
32 16 mm

SKF 350998 Needle Roller and Cage Thrust Assemblies

ISO 1,2 mm
17 6 mm

SKF 353164 Tapered Roller Thrust Bearings

6100 rpm Open
31.6 kN C3

SKF BFSB 353205 Cylindrical Roller Thrust Bearings

310 170
1410 kN CX
1/10