Self Aligning Ball Bearings

Contact Now

A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Depending on the series, most self-aligning bearings can be interchanged with standard ball bearing assemblies. (6200 and 6300 have direct interchanges with the 1200 and 1300 series). “However, if this is not possible, the self-aligning bearing may be wider or can have a tapered bore,” Brda explains.

Normal mounting and handling procedures for a cylindrical bore bearing should be followed. For the tapered bore, special care must be taken to ensure the bearing is driven up the taper the appropriate amount. Because matching the bearing to the specific application is critical, it is important to verify your application need with your selected vendor.

40 mm x 80 mm x 18 mm NACHI 1208K self aligning ball bearings

Set Screw Contact with Slinger
3/4 in UCMT200MZ2

95 mm x 170 mm x 32 mm FAG 1219-M self aligning ball bearings

3.42 No
8482.50.00.00 Bronze

80 mm x 170 mm x 39 mm FAG 1316-K-M-C3 self aligning ball bearings

B04144 N/A
Roller Bearings 0888569023841

20 mm x 52 mm x 15 mm NACHI 1304 self aligning ball bearings

N/A Bearings
0 M06110

50 mm x 90 mm x 23 mm FAG 2210-TVH self aligning ball bearings

DODGE 0782477449925
0.0 ABB MOTORS AND MECHA

6 mm x 20 mm x 6 mm NMB PBR6FN self aligning ball bearings

1/2 in 0.406 in
Commercial/Indu No Fitting

Toyana 1310K self aligning ball bearings

0.0 AMI BEARINGS
M06110 N/A

8 mm x 22 mm x 7 mm FAG 108-TVH self aligning ball bearings

6.016 Inch | 152.806 REXNORD
Clearance Seal 4.094 Inch | 104 Mil

55 mm x 100 mm x 25 mm ISB 2211 TN9 self aligning ball bearings

QM INDUSTRIES TIMKEN
0.0 0883450996945

60 mm x 110 mm x 22 mm ISO 1212K+H212 self aligning ball bearings

N/A Bearings
B04311 0

70 mm x 125 mm x 24 mm NKE 1214-K self aligning ball bearings

-20 to +120 &de Nylon
29 mm 12 mm

Toyana 2215K+H315 self aligning ball bearings

N/A 1.7
CONSOLIDATED BEARING 0.0
2/18