AST AST650 455550 plain bearings

e:10 mm; H3:110; A2:42.6 mm; Designation of bearing:UC210G2L4; L:165 mm; J:138 mm; s1:25.8 mm; C:35.1 kN; C0:23.2 kN; A4:28 mm;

Static load, C0:906 kN; Characteristic outer ring frequency, BPF0:9.64 Hz; Nref:2,400 rpm; Y1:2.51; B:64 mm; da min:141 mm; Characteristic inner ring frequency, BPFI:12.36 Hz; k:4.5 mm; Fatigue limit load, Cu:68 kN; Number of lubrication holes:3;

H1:14 mm; C0:29.2 kN; C:43.55 kN; Designation of open end cover:SCOU211-32; S:22.2 mm; Z:77 mm; H:63.5 mm; A:66 mm; N:M16; T min.:-20 °C;

operating temperature range:-40 to 120 ºC; precision rating:Class 0; Min operating temperature, Tmin:-60 °C; cage material:Steel; series:60; ra max:0.3 mm; Outer Race Width:0.394 Inch | 10 Mill; Cage Material:Steel; Internal Clearance:C3-Loose; static load capacity:3350 N;

Characteristic rolling element frequency, BSF:4.61 Hz; Characteristic cage frequency, FTF:0.4 Hz; B:17 mm; D:72 mm; d:35 mm; d1:44 mm; Min operating temperature, Tmin:-20 °C; D1:62.7 mm; rs min:1.1 mm; Dynamic load, C:25.3 kN;

Grease Type:Unirex N2; Shaft Attachment (2):D-Lock; Retainer Material:Nylon; Base to Center Height:Not Applicable; Flinger Material:Steel; UPC:782475892532; Bearing Insert Material:Steel; Retainer Type:Std Retainer; Bearing Series:211 Series; Max Bearing Speed:3500 rpm;

G:R1/8"; Designation of bearing:UC212-38G2T04; C0:32.8 kN; s1:32.55 mm; C:52.5 kN; J:143 mm; Weight:4.93 kg; N:18mm; A2:73.7 mm; T min.:-40 °C;

L:264 mm; Weight:1.67 kg; B1:43.5 mm; Designation of bearing:EX202-10G2L4; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; d:15.88 mm; C0:6.65 kN; H:78 mm; L1:225 mm;

d1:82 mm; Designation of bearing:EX212G2L3; N1:32 mm; B:61.8 mm; C0:32.8 kN; SW:5 mm; Weight:5.07 kg; A1:22 mm; H1:130 mm; B1:77.7 mm;

S:14.3 mm; L1:27 mm; G:M6x1; C:14 kN; L:84 mm; A:38 mm; A1:23 mm; Designation of housing:PA205N-; J:56 mm; B:34 mm;

Characteristic cage frequency, FTF:0.41 Hz; D:47 mm; B:12 mm; Nlim (grease):15,000 rpm; f0:14.5; da min:29 mm; Min operating temperature, Tmin:-35 °C; Characteristic rolling element frequency, BSF:5.49 Hz; Radial clearance class:C3; Static load, C0:5.85 kN;

A2:31 mm; B:22 mm; C:9.55 kN; Designation of housing:FL203N-; d:12 mm; C0:4.78 kN; L:57 mm; A:25.5 mm; Recommended tightening torque for set screw:3.5 Nm; J:76.5 mm;

A2:69.7 mm; L:138 mm; J:202 mm; Recommended tightening torque for set screw:22 Nm; H:238 mm; G:R1/8"; s1:32.55 mm; B:65.1 mm; S:25.4 mm; C:52.5 kN;

Inventory:0.0; f0:13.2; Rolling Element:Ball Bearing; D:28 mm; Category:Single Row Ball Bear; rs min:0.3 mm; Max operating temperature, Tmax:110 °C; B:8 mm; da max:16 mm;

B:45.3 mm; A2:61.5 mm; A:45.8 mm; Designation of housing:FLE211N-; T max.:100 °C; A1:15 mm; N:18mm; d:50.8 mm; H:222 mm; s1:22.65 mm;